REQUEST OUR SERVICE
NAME:
ADDRESS:
PHONE:
EMAIL:
COMMENT:  
 

 
 VestFrost FKG 410

 Ebac Pro200

 HB Cotes CRB

 Ebac Pro100

 HB Cotes CRP

 Portable dehumidifiers

 Maintenance services

 Vestfrost FKG274

 Vestfrost FKG404

 Applications

 Aerial AD790

 Aerial AD770

 Permanent dehumidifiers

 
Dehumidifiers: Stationary - Portable | Services | Applications     
Aerial portable dehumidifier, air dryer, AD770, blower

Air dehumidifier AD 770

Features
Completely protected in an impact-resistant plastic casing:
– Axial fan with aluminium fan wheel (with winding protection).
– Fully hermetically sealed rotary compressor, protected against overloading,
vibration-insulated bearings.

Condenser and evaporator made from copper piping covered with aluminium fins.

Cooling circuit made from copper piping with expansion valve and filter dryer.Service connector on the suction side.

Automatic hot-gas defrosting, controlled by Dry-Logic.

Design and dimensions

Area of use: Closed rooms

Suitable for
Heated rooms up to approx. 950 m3***
Unheated rooms up to approx. 400 m3***

Functional principle
Condensation principle
(heat-pump technology with energy recovery)

Set-up/mobility
On the floor. Ergonomically designed casing for easy transport,
integrated push-handle, two big wheels. Stackable.

Air inlet: At the back, via easily removable air filter

Air outlet: On the front (draught-free, through slanted fins)

Handling: Plug into power socket, switch on the dehumidifier at the
0/1 switch and set the required humidity on the hygrostat.

Water outlet: Tube connector (15 mm) high up on unit, so that the drainage
pipe (accessory) can be led away at a downwards
slope. Water container available as an accessory. A built-in
condensate pump is available as an optional extra.

Dimensions
Height/width/depth: 1000 mm/640 mm/580 mm

Weight: 55 kg

Maintenance: Empty container, clean/change filter

Guarantee: Two years from date of purchase


General specifications
Casing:
Impact-resistant plastic (PE polyethylene DIN 16776),
operating panel and air inlet/outlet: galvanised sheet steel,
flux-coated IP 44, protection category: IP 44

Dehumidifying performance/Power consumption
at 30 °C/80% r.h. = 73,0 l/day 1.015 watt 0,33 KW/ltr.
at 27 °C/60% r.h. = 45,0 l/day* 840 watt 0,44 KW/ltr.
at 20 °C/60% r.h. = 29,5 l/day* 710 watt 0,58 KW/ltr.
at 10 °C/70% r.h. = 18,0 l/day* 558 watt 0,74 KW/ltr.

Air circulation rate: 900 m3/h

Operating range: Temperature: +3 °C to +32 °C

Humidity: 40 to 95% r.h.

Noise level: 53 dB(A)

Controls and indicator lights
On/off switch (0/1), yellow, illuminated
Indicator lights: green = defrosting,
yellow = humidity OK (unit off), operating hours counter,hygrostat

Refrigerant: R134a (1,200 g), CFC-free

Electrical connection
Mains connection: 1 x 230 V/50 Hz
Fuse: 10 A slow-blow
Power consumption: maximum 1.015 watt**
Connector cable: approx. 4,5 m, tread-proof rubber power, cable, incl. cable keeping

* As defined in DIN EN 810 ** At 32 °C ambient temperature *** Guideline/empirical values

Thermo Tech Ltd
24 hr phone: 09 274 4447 PO Box 58-581 Greenmount, Auckland, New Zealand
Site created by BarNet Internet